Lebara APN Settings: Updated UK APN Settings

Are you a Lebara telecom network user facing the problem of slow Internet speed? Don’t worry we’re here for you we will provide you with the updated Lebara APN Settings. After using these settings you will be able to get the fast Internet speed for your Android and iOS devices. 

Along with that in this article, we will try to solve every single problem related to Lebara Telecom through this article. So without wasting any more time let’s move towards the main article right now.

What Are The Lebara APN Settings For Android Devices?

If you are an Android user and want to increase the internet speed of your device then simply use the updated APN configurations for Lebara. 

To change the APN setup simply use these steps: Go to Settings, proceed to Network & Internet, choose Mobile Network or (SIM), and then Access Point Names. Add a new APN. now simply copy the below-given Lebara internet settings and paste it after that press the save button.

SettingsValues
NameLebara UK
APNuk.lebara.mobi
ProxyLeave blank 
PortLeave blank 
Usernamewap
Passwordwap
ServerNot Set
MMSChttp://mms.lebara.co.uk/servlets/mms
MMS Proxy212.183.137.012
MMS Port8799
MCC234
MNC15
Authentication TypePAP
APN typeDefault,supl,mms
APN protocolIPv4
APN roaming protocolIPv4
Enable/disable APNAPN Enabled
BearerUnspecified
MVNO typeNone
MVNO ValueNot set

NOTE: it is advised by our team of experts to simply copy and paste the table instead of typing it manually to avoid comma and spelling mistakes. Any kind of comma and grammatical mistake can lead to the problem of the Lebara APN setup not working properly.

What Are The Lebara APN Settings For iPhone Devices?

To set up APN settings simply open Settings, go to Cellular, select Cellular Data Options, and then choose APN after that copy and paste the below-given setup and press the ok button to save the settings.

Cellular Data / Internet Settings:

SettingsValue
APNuk.lebara.mobi
UsernameEmpty 
PasswordEmpty 

LTE Setup (Optional):

SettingsValue
APNLeave blank 
UsernameLeave blank 
PasswordLeave blank 

MMS Settings:

SettingsValue
APNuk.lebara.mobi
Usernameblank
Passwordblank
MMSChttp://mms.lebara.co.uk/servlets/mms
MMS Proxy212.183.137.012:8799
MMS Message Size1048576
MMS UA Prof URLhttp://www.apple.com/mms/uaprof.rdf

NOTE: Before using the Lebara APN setup for iphone. Do not forget to restart your device it will automatically save the settings and after that, you will be able to use them without any problem.

What Are The Lebara 5G Internet Settings?

If you want to get the turbo boost 5G Internet speed for your devices then you can use this 5G setup to boost your internet speed.

SettingsValue
NameLebara UK
APNuk.lebara.mobi
ProxyEmpty 
PortEmpty 
Usernamewap
Passwordwap
ServerNot Set
MMSChttp://mms.lebara.co.uk/servlets/mms
MMS Proxy212.183.137.012
MMS Port8799
MCC234
MNC15
Authentication TypePAP
APN typedefault,supl,mms
APN protocolIPv4
APN roaming protocolIPv4
Enable/disable APNAPN Enabled
BearerUnspecified

After using these internet settings you will get the turbo boost 5G Internet speed for your Android devices. This special premium setting is free and safe to use, so please don’t hesitate to change your settings to get ultra-fast internet speed.

Why Is My Mobile Data Not Working On Lebara?

There can be so many reasons of your Lebara mobile data is not working anymore let’s have a look at them.

  • Check Mobile Data Settings: The primary reason your mobile data is not working can be your mobile data is off in this situation simply on your mobile data to using the Internet on your device.
  • Data Roaming: If you are in a different country it can also be a reason your mobile data is not working in this situation simply turn on the roaming function to use the internet.
  • APN Settings: Using the old Lebara APN Settings Can be the reason your mobile data is not working. In this situation, it is advised by our team of experts to simply use the upper provided setup to gain the turbo boost Internet speed for your devices.
  • Network Coverage: If you’re not in the network coverage area of Lebara Telecom that can also be a reason your mobile data is not working in this situation simply go to a better place where network coverage is good to use the internet.

What Network Does Lebara Use?

Lebara Telecom depends on the Orange telecom network to provide high-level mobile internet coverage and other telecom services to its users.

How Do I Put Data On My Lebara?

To Configure Lebara APN on your phone follow these steps; Go to Menu/Settings > Select SIM cards and mobile networks or Mobile networks > Name of access points or click on Lebara then Name of access points > Create or add a new APN > Scroll to “Name” and enter Lebara > Press OK > Scroll and select APN, enter fr.lebara.mobi and press OK > Scroll and select APN type, enter default and press OK > Tap the plus icon or the 3 little dots at the top of the screen > Select save. Your phone has been configured.

What Is The APN For Lebara UK?

Lebara APN settings UK are as follows: Name: Lebara Internet, APN: uk.lebara.mobi, Username: wap, Password: wap, MMSC: http://mms.lebara.co.uk/servlets/mms, MMS Proxy: 212.183.137.012, MMS Port: 8799, MCC: 234, MNC: 15, APN Type: default, supl, mms. 

How Can I Get Lebara Internet Settings Through Customer Care Services?

Simply dial 0800 368 5010 and press the call button after that your call will be connected to the representative person. Tell them you don’t have the Internet settings for your Android or iOS devices and you need APN settings to access the Internet after that they will verify your identity by asking a few questions. Once the verification process is completed successfully they will provide you the Internet settings for your device.

Also, have a look at our other articles on the topic:

Click on the icon of the Contact Us section appearing on the home page of our website to get the guest post opportunity.

Scroll to Top